Hand-operated installation tool
| DRILLING | |
| The hole is drilled using a commercially available stand drill bit. |  |
| TAPPING | |||||||||
| The AMECOIL taps can be used by hand or by machine. | |||||||||
 |
Taper tap Entry on 4 leads. For through holes and blind holes. Can be used on all metals and for high precision tapping. |
 |
Plug tap Entry on 2 leads. For through holes and blind holes. Tapping by hand or by machine. |
 |
Straight groove machine tap with "GUN cut" entry Entry on 4 leads. For through holes. The "GUN" cut drives the chips out on the other side. |
||||
 |
Machine tap for 35° to 39° right-hand helical grooves Entry on 2 to 3 leads. For blind holes. For all materials which are difficult to machine. Special taps on request. |
 |
Inspection stamp Allows checking the tap which must be fitted with an AMECOIL thread insert. |
||||||
| INSTALLATION | |||||||
| Conventional series | |||||||
 |
Multiple-dimension with smooth pin |
 |
Multiple-dimension with threaded pin |
 |
Single-dimension with smooth or threaded pin body |
 |
Single-dimension with mandrel |
| AMECOIL SR series | |||||||
 |
Single-dimension with threaded pin and handle |
 |
Single-dimension with threaded pin and knob |
||||
| ACCESSORIES | ||||
 |
Break punches They are used to break the thread drive pin. Hand operated or automatic models available. |
 |
Extractor AMECOIL extractors are used to remove thread inserts which are incorrectly laid. |
|
| Kits | ||||
 |
 |
 |
 |
 |
|
Multiple-dimension |
Single-dimension |
Spark plug kits |
Minikit |
Minikit |
